喷淋洗涤处理设备简介
原理简介： 对于废气中存在水溶性污染物或有固体杂质，一般采用喷淋洗涤工艺。主要原理为塔体内气液逆向接触，在填料等部件上增加接触面积，利用水洗、酸洗、碱洗工艺消减废气中的污染物。
特点优势：
1、稳定自动运行、对可溶性气体处理效果较好安装维护简单；
2、对于不同污染源，可以添加不同药剂，处理效果好，适应性强一次投入较低，性价比高；
3、一次投入低，运行成本低。
应用范围：
1、污水厂废气处理、电子厂酸洗废气处理、家具厂废气处理等。
2、适合酸碱废气处理。
3、有时也作为预处理使用。
注意事项
1、喷淋后空气湿度较高，会对后续处理造成一定的影响。
2、为保证处理效率，需及时清理洗涤下来的杂质。
A brief introduction to the principle: for water-soluble contaminants or solid impurities present in exhaust gas, using spray washing process. The main principle is the reverse contact between the gas and liquid in the tower. The contact area is increased on the filler and other parts, and the pollutants in the exhaust gas are reduced by washing, pickling and alkali washing.
Characteristic advantage:
1, stable and automatic operation, the treatment of soluble gas is better, installation and maintenance is simple;
2, for different sources of pollution, you can add different agents, the treatment effect is good, adaptability, low investment, cost-effective;
3, low investment and low operation cost.
Application range:
1. Waste gas treatment in waste water plant, treatment of waste gas from acid washing in electronic factory, waste gas treatment in furniture factory, etc..
2, suitable for acid and alkali waste gas treatment.
3, sometimes used as pretreatment.
Matters needing attention
1, after spraying air humidity is higher, will have a certain impact on the follow-up treatment.
2, in order to ensure the processing efficiency, the cleaning impurities should be cleaned up in time.
|
